Performance enhancement of energy extraction capability for fuel cell implementations with improved Cuckoo search algorithm

This paper addresses an improved optimization method to enhance the energy extraction capability of fuel cell implementations. In this study, the proposed method called Dynamic Cuckoo Search Algorithm (DCSA) is tested in a stand-alone fuel cell in order to control the system power under dynamic temperature response. In the operational process, a fuel cell is connected to a load through a dc-dc boost converter, and DCSA is utilized to adjust the switching duration in dc-dc converter by using voltage, current and temperature parameters. In this way, it controls the output voltage to maximize power delivery capability at the demand-side and eliminates the drawback of conventional cuckoo search algorithm (CSA) which cannot change duty cycle under operating temperature variations. In this regard, DCSA shows a significant improvement in terms of system response and achieves a more efficient power extraction than the conventional CSA method. In order to demonstrate the system performance, the stand-alone fuel cell system is constructed in Simulink environment via a processor-in the-loop (PIL) based digital implementation and analyzed by using different optimization methods. In the analysis section, the results of the proposed method are compared with conventional methods (perturb&observe mppt, incremental conductance mppt, and particle swarm optimization). In this context, convergence speed and efficiency analysis for both methods verify that the DCSA gives original results compared to conventional methods.     

Experimental study on the effect of lateral concentrated smoke extraction on smoke stratification in the longitudinal ventilated tunnel

Smoke is the main cause of death in tunnel fires. It is one of the important measures to maintain smoke stratification in the early stage of tunnel fire. This article focused on experimentally studying the combined effect of lateral concentrated smoke extraction and longitudinal ventilation on the smoke stratification, which never be revealed before. The velocity of the smoke layer and air layer, vertical temperature distribution, and the flow patterns of the smoke were measured. It was found that the longitudinal ventilation and lateral concentrated smoke extraction would affect the flow of the smoke and change the shear velocity between the smoke layer and air layer, then, the patterns of the smoke layer will be affected. And the flow patterns with Froude (Fr) number can be classified into three categories: (a)Fr < 0.6 , with stable smoke stratification; (b) 0.6 < Fr < 0.85 , with a stable smoke stratification but the blurring interface; and (c) Fr > 0.85 , the smoke layer is completely unstable. The result can provide a reference for ventilation design of immersed tube tunnels.     

Prism coupling method to evaluate the light extraction efficiency of outcoupling substrates

One of the key challenges in organic light-emitting diodes (OLEDs) for lighting applications is efficient light extraction from the planar, multi-layered OLED stack. Several different light extraction approaches are being explored currently by researchers, however characterizing light extraction films after fabricating OLEDs is not a viable approach when the outcoupling films have large surface roughness and is time consuming as well. Here we apply prism coupling method (PCM), a simple and elegant tool, to characterize outcoupling films. We show the effectiveness of PCM in estimating light extraction efficiency of outcoupling films. PCM can expedite selection and optimization of various light extraction approaches without the need to build OLEDs. The experimental results are corroborated by the optical simulations done using ray tracing method taking into account Mie scattering from wavelength sized spherical inclusions in an outcoupling film.     

油田含油污泥处理技术研究进展

含油污泥处理是目前油田亟待解决的问题之一。介绍了国内外含油污泥处理技术的研究进展，主要处理技术有溶剂萃取处理技术、焚烧处理技术、热解处理技术、生物处理技术、调剖处理技术等，并介绍了国内部分油田的含油污泥处理工艺。     

Organic light-emitting diodes fabricated on recessed anodes for light extraction enhancement

Circular recesses have been fabricated on indium tin oxide (ITO) anodes to enhance light extraction of organic light-emitting diodes (OLEDs). The effects of recess depth and recess coverage ratio on the performance of a green OLED were systematically investigated. Results showed that the current efficiency could be enhanced from 40.7 cd/A of a planar device to 47.2 cd/A of the device with a recess depth of 100 nm and a recess coverage ratio of 14.1%. The enhanced light extraction by the recess wall effect was realized to be the major factor leading to the improved efficiency. The efficiency is however limited by the accompanying increase in electrical resistivity of the ITO films at deep recesses and high recess coverage ratios. Despite of the insignificant efficiency enhancement (up to 16%) in this study, this recessed ITO approach provides a simple architecture to enhance waveguide mode light extraction without adding an internal medium.